Industrial Ventilation for Ohio Manufacturing Facilities: Can Your System Keep Up With Production?

What Facility Managers Should Review When Equipment, Materials, Layouts, or Production Schedules Change

A new production line starts next month. The equipment fits, electrical work is underway, and the team is preparing for another shift.
But has anyone checked whether the ventilation system can support the change?
That question is easier to address before equipment is installed and ductwork becomes harder to modify.
Reviewing industrial ventilation for Ohio manufacturing facilities should be part of planning changes to equipment, materials, production rates, or layouts.
The review should establish what the new process needs, whether the existing system can meet those needs, and how performance will be checked before startup.
You do not need to design the exhaust system yourself.
You need to know who is evaluating the change, what work is required, and what results will confirm that the system performs as intended.
When to Review Industrial Ventilation for Ohio Manufacturing Facilities
Ventilation belongs in the planning discussion alongside electrical service, equipment access, and production scheduling.
HSE’s local exhaust guidance recommends coordinating ventilation modifications with process changes rather than assuming the existing system will accommodate them. [1]
Start by identifying what will be different:
What Is Changing? | What Needs to Be Resolved? |
A machine or production line is being added | Its ventilation requirements and whether the proposed system can meet them |
Materials, coatings, or cleaning products are changing | Whether the airborne hazards or collection requirements will change |
Production volume is increasing | Whether the assessment covers the proposed production rate |
Another shift is starting | Ventilation schedules, maintenance access, and responsibility for responding to problems |
Workstations or partitions are moving | Whether the revised arrangement still supports effective capture |
Another exhaust connection is proposed | How performance will be verified at both new and existing workstations |
Give the project team a marked floor plan and a brief description of the change. Include equipment specifications, material information, and the proposed operating schedule.
“We are adding this machine, using these materials, during these hours” is a much better starting point than “We need more ventilation.”
A Comfortable Building Does Not Answer the Ventilation Question
Temperature is easy to notice. Process ventilation requires a different assessment.
OSHA distinguishes HVAC used primarily for comfort from ventilation intended to control workplace emissions and exposures. Local exhaust captures contaminants near their source; general ventilation serves the wider space. [2]
Consider a plant adding a second machining station. The room temperature may remain comfortable, but that does not establish whether the new process has appropriate contaminant control.
Separate the questions:
Does the space need additional heating or cooling?
What emissions does the process produce?
How will those emissions be controlled?
Defining the problem first helps prevent a proposal from addressing only the most noticeable complaint.

Will the Hood Still Capture Emissions Where the Work Happens?
A layout can look good on a drawing and create problems at the workstation.
Hood position, operator location, and nearby air movement affect how effectively the system captures emissions. Changes in the size of parts or materials—or how employees handle them—can also affect whether the hood remains properly positioned for the task. [3]
Have the reviewer observe the complete task—not just the machine sitting idle.
For the hypothetical second machining station, that means watching how employees load parts, operate the equipment, and remove finished work.
Does the ventilation arrangement accommodate those activities, or does something have to be moved out of the way?
Resolve three practical questions:
Is the capture arrangement suitable for the current task?
Can employees use it correctly without obstructing their work?
Could nearby doors, supply outlets, or portable fans interfere with it?
Include operators in this discussion. They can explain the movements and access requirements that a floor plan does not show.

Can the Existing Exhaust System Serve Another Machine?
An available duct connection can make an expansion look straightforward. It does not establish that the system has spare capacity.
OSHA lists added branches, clogged air cleaners, duct damage, and fan problems among possible causes of reduced exhaust performance. [2]
Before approving another connection, have the contractor identify what the existing system was designed to serve and how the proposed addition will be evaluated.
The proposal should answer:
Which workstations will be tested after the new connection is installed?
For the plant adding a second station, checking only the new branch would leave the original workstation’s performance unresolved.
Include existing equipment in the acceptance scope. Otherwise, the project may be treated as complete before its effect on the rest of the system has been verified.
Plan for Winter With the Doors Closed
Exhausted air needs a planned replacement-air path. That replacement air—often called makeup air—must be delivered without creating drafts that interfere with capture. Heating it also contributes to operating costs. [3]
For an Ohio manufacturing facility, put a cold-weather operating scenario into the discussion:
“How will this arrangement perform with our doors in their normal winter positions?”
Have the contractor explain where replacement air will enter, how it will be heated when necessary, and how its operation will coordinate with exhaust equipment.
Also establish what happens if the makeup-air equipment fails.
These details belong in the project scope. Leaving them until startup puts the facility team in the position of resolving comfort complaints while production is trying to get underway.

A Different Material Deserves a Fresh Review
“Same machine, different material” is an important change to disclose.
Provide current safety data sheets and describe how the material will be processed.
Ask the project team what additional information is needed to determine whether the existing collection equipment is suitable.
Combustible dust requires particular attention. OSHA identifies materials including wood, plastics, food products, and certain metals as potential dust-explosion hazards under suitable conditions. How a material behaves in a large piece does not establish how its fine dust will behave. [4]
Where potentially combustible dust is involved, bring in a specialist qualified to assess that hazard before selecting or modifying collection equipment.
The question is specific:
“Is this system suitable for the material and process we intend to connect?”
Do not leave that decision buried in a general statement that the fan has enough airflow.
Agree on What “Working Properly” Means Before Startup
A commissioning report should identify the operating conditions, test results, and performance benchmarks used to evaluate the system.
HSE’s guidance also calls for checking performance at every hood in a multi-hood arrangement. [5]
Before work begins, agree on what the handoff will include:
Handoff Item | What You Should Be Able to Identify |
Test conditions | Which processes and equipment combinations were operating |
Acceptance criteria | The targets used and who established them |
Results | What was measured and whether the criteria were met |
Outstanding work | What remains unresolved and who owns each item |
Operating instructions | What staff should check and how to report problems |
An airflow test and an employee exposure assessment answer different questions. OSHA’s investigation guidance considers both ventilation performance and employee exposure when evaluating effectiveness. [2]
Have the project team determine whether a qualified industrial hygienist should assess exposure.
“Fan checked” does not tell the next facility manager what was tested or what the system is expected to do.
Ask for a record someone else can understand six months later.

Make the Handoff Work for Every Shift
Adding a second shift means more than extending a schedule. Someone must know how to recognize and report a ventilation problem during those hours.
HSE’s guidance recommends training employees in system use, checks, and responses to problems. Process changes may require updated instructions and training. [1]
Before closing the project, assign responsibility for operator checks, maintenance, abnormal indications, and recordkeeping.
Walk through one practical scenario:
If an operator reports a ventilation alarm at 10 p.m., who receives the report, and what instructions does that person follow?
A named contact and a documented response are more useful than “notify maintenance.”
Bring These Details to Your First Review
You do not need a complete engineering package before contacting a contractor. Gather what you have:
A floor plan marking affected machines and workstations.
A description of the current process and proposed change.
Equipment specifications and material information.
Operating hours and equipment expected to run together.
Existing ventilation drawings, service records, and test reports.
Employee observations with locations, tasks, and times.
Mark missing information as unknown. That helps the project team identify what must be investigated instead of working from assumptions.
Planning a Production Change? Talk With ETS
Whether you are adding equipment, rearranging a work area, or extending production hours, include HVAC and ventilation in the discussion early.
Engineered Temperature Solutions serves commercial and industrial facilities throughout Columbus and Central Ohio.
Contact ETS to discuss the ventilation, air-handling, and temperature-control needs associated with your plans.
Herbert Platt
“Detailed rooftop-unit troubleshooting and ongoing maintenance for five HVAC units used daily.”
Rob Orlowski
"Commercial HVAC equipment support and dependable repair service."
Brad Ginger
"Commercial brewery work involving HVAC, electrical, plumbing, and boiler repair."
Key Takeaways
Review ventilation when equipment, processes, materials, or layouts change.
Evaluate contaminant capture separately from room temperature.
Include existing workstations when testing an expanded exhaust system.
Plan makeup air and cold-weather operation before installation.
Define acceptance criteria, documentation, and shift responsibilities before handoff.
Sources
Health and Safety Executive. Clearing the Air: A Simple Guide to Buying and Using Local Exhaust Ventilation. — Guidance on coordinating process changes, ventilation, training, and maintenance.
Occupational Safety and Health Administration. OSHA Technical Manual, Section III, Chapter 3: Ventilation Investigation. — Ventilation types, performance problems, investigation factors, and measurements.
Health and Safety Executive. Controlling Airborne Contaminants at Work: A Guide to Local Exhaust Ventilation, HSG258. — Technical guidance on hood arrangements, airflow interference, and replacement air.
Occupational Safety and Health Administration. Combustible Dust: An Explosion Hazard. — Explains combustible-dust hazards and examples of affected materials.
Health and Safety Executive. Commission Your Local Exhaust Ventilation System. — Commissioning conditions, performance benchmarks, and documentation. HSE sources provide technical guidance here, not statements of Ohio legal requirements.





Comments